Smart Technologies SMART Board 600i4 Configuration And User's Manual page 70

54 | CH A P T E R 4 – R E MO T E L Y M A N A G IN G Y O U R IN T ERAC T IVE WH IT EBOA RD
SYS TE M
Command
set locationinfo [description] Enter a descriptor no
set contactinfo [description] Enter a descriptor no
set videomute [target]
set 3denable [target]
set 3dinvert [target]
set 3dformat [target]
set emergencyalertmsg
[description]
set emergencyalert [target] =on
System Control Commands (Passive)
These commands control the current system settings. These commands are always
available, even when the projector is off.
Command
set restoredefaults
set lamphrs [target]
set vgaoutnetenable
[target]
NOTE
The VGA Out and Network settings features are Off by default. Select On to
activate these features.
Command Target
Range
more than 16 characters
long.
more than 16 characters
long.
=on
=off
=on
=off
=leftright
=rightleft
=interleaved
=overunder
Enter a descriptor no
more than 60 characters
long.
=off
Command Target Range
[none]
=0
=on
=off
Response
locationinfo=[description]
contactinfo=[description]
videomute=[target]
3denable=[target]
3dinvert=[target]
3dformat=[target]
emergencyalertmsg=
[description]
emergencyalert=[target]
Response
restoredefaults=done
lamphrs=0
vgaoutnetenable=[target]