Adjusting Projector Settings - Smart Technologies SMART Board 600i4 Configuration And User's Manual

24 | CH A P T E R 3 – U SIN G Y O UR IN T ER ACT IV E WH IT EB OARD SY ST EM
Number Function
7
(Power)
8 (Enter)
9 (Volume Up)
10 (Volume Down)

Adjusting Projector Settings

The remote control's Menu button enables you to access the on-screen display
to adjust the projector settings.
NOTES
• There are no projector menu options on the ECP. Keep your remote control
in a safe place because the ECP is not meant to substitute for the remote
control.
• The menu heading at the top of all settings is SMART UF65 Settings or
SMART UF65w Settings.
Menu Options
Menu
Settings
Heading
Image Display
Adjustment Mode
Brightness
Contrast
Frequency
Tracking
Description
Turn on or turn off the projector
Accept the selected mode or option
Increase the volume
Decrease the volume
Description
Indicates the projector's display output
(SMART Presentation, Bright Room, Dark Room,
sRGB and User).
Adjusts projector brightness from 0 to 100.
Adjusts the difference between the lightest and
darkest parts of the image from 0 to 100.
Adjusts the display data frequency of the projected
image from -5 to 5 to match the frequency of your
computer's graphics card. The default is 0. Applies to
VGA inputs only.
Synchronizes your projector's display timing with your
computer's graphics card from 0 to 63. Applies to VGA
inputs only.