Audio Output Controls - Smart Technologies SMART Board 600i4 Configuration And User's Manual

49 | CH A P T E R 4 – R E MO T E L Y M A N A G IN G Y O U R IN T ERAC T IVE WH IT EBOA RD
SYS TE M

Audio Output Controls

These commands control your projector's audio output to your audio system
(not included). Audio output controls aren't defined by the video source. These
settings are unavailable when the projector is off.
Audio Output Information Commands
These commands inform you of the current audio output settings.
Command
get volume
get mute
get volumecontrol
get cc
Audio Output Control Commands
These commands control your audio output settings. See page 42 for setting absolute
and adjustment commands.
Command
set volume [value]
set mute [target]
set volumecontrol [target]
set cc [target]
NOTE
Typically, CC1 displays American English subtitles, while CC2 displays other
regional languages, such as French or Spanish, depending on television channel
or media setup.
Response
volume=[current volume setting]
mute=[current mute setting]
volumecontrol=[current volume control setting]
cc=[current closed captioning language setting]
Command Target Range
=-20 to =20
=on
=off
=on
=off
=cc1
=cc2
=off
Response
volume=[value]
mute=[target]
volumecontrol=[target]
cc=[target]