Powerstate Controls - Smart Technologies SMART Board 600i4 Configuration And User's Manual

44 | CH A P T E R 4 – R E MO T E L Y M A N A G IN G Y O U R IN T ERAC T IVE WH IT EBOA RD
SYS TE M

Powerstate Controls

These commands turn on or turn off the projector and request the projector's current
powerstate. The projector's powerstate determines whether or not certain commands
are available at that time. These settings are always available, even when the
projector is off.
Command
on
off
off now
get powerstate
Powerstate Command Description
Command
on
off
off now
get powerstate
Powerstate Response Field Description
Field
Powering
On
Cooling
Confirm off
Idle
Response
powerstate=[field]
powerstate=[field]
powerstate=[field]
powerstate=[field]
Description
Turns on the projector.
Starts the shutdown process. A dialog box appears with the
message, "Press Power Button to Turn off Projector."
You must send a second Off command within 10 seconds
to completely turn off the projector.
Shuts down the projector immediately. You can't delay or
cancel this command.
Indicates the projector's current powerstate.
Description
The projector is turning on.
The projector is on.
The projector is cooling.
Confirm off is a non-selectable powerstate that is returned
during stage one of the two-button off sequence.
The projector is off but still receiving power (standby).