Smart Technologies SMART Board 600i4 Configuration And User's Manual page 45

29 | CH A P T E R 3 – U SIN G Y O UR IN T ER ACT IV E WH IT EB OARD SY ST EM
Menu
Settings
Heading
Network Network
and VGA
Out
Status
DHCP
Password
Reminder
IP Address
Subnet
Mask
Gateway
DNS
MAC
Address
Group
Name
Projector
Name
Location
Contact
Description
The VGA out and Network features are Off by
default. Select On to activate these features.
Displays the current network status as Connected,
Disconnected or Off.
Displays the status of the network's Dynamic Host
Control Protocol (DHCP) as On or Off.
• On automatically assigns the DHCP server's IP
address to the projector.
• Off enables an administrator to assign an IP
address manually.
E-mails the network password to the mail recipient.
See page 61 in the section on Web Page
Management to set up a destination e-mail address.
Displays the projector's IP address in values between
0.0.0.0 and 255.255.255.255.
Displays the projector's subnet work mask number in
values between 0.0.0.0 and 255.255.255.255.
Displays the projector's default network gateway in
values between 0.0.0.0 and 255.255.255.255.
Displays the projector's primary domain name number
in values between 0.0.0.0 and 255.255.255.255.
Displays the projector's MAC address in
xx-xx-xx-xx-xx-xx format.
Displays the projector's workgroup name as set by an
administrator (maximum 12 characters).
Displays the projector's name as set by an
administrator (maximum 12 characters).
Displays the projector's location as set by an
administrator (maximum 16 characters).
Displays the contact name or number for projector
support as set by an administrator (maximum 16
characters).