Smart Technologies SMART Board 600i4 Configuration And User's Manual page 43

27 | CH A P T E R 3 – U SIN G Y O UR IN T ER ACT IV E WH IT EB OARD SY ST EM
Menu
Settings
Heading
Default, Lamp Mode
cont'd
Auto Power
Off
(minutes)
Zoom
Projector ID
Aspect
Ratio
Description
Adjusts lamp brightness to Standard or Economy.
Standard displays a high-quality, bright image.
Economy increases the lamp life by decreasing the
brightness of the image.
Sets the length of the auto power off countdown timer
between 1 and 240 minutes. The timer begins to count
down when the projector no longer receives a video
signal. The timer finishes when the projector enters
Idle mode. Select 0 to turn off the timer.
Adjusts the zoom to the center of the image in or out
from 0 to 30. These settings affect image adjustments
done mechanically to the boom.
Displays the projector's unique ID number (from 0
to 99) within your organization's network.
Adjusts the image output to Fill Screen, Match Input
or 16:9.
• Fill Screen produces an image that fills the entire
screen with stretching and scaling.
• Match Input matches the projector's aspect ratio to
the input's aspect ratio, with black bands appearing
along the top and bottom edge of the screen
horizontally, in letterbox format, or with black bands
appearing along the left and right edge of the
screen vertically, in pillarbox format.
• 16:9 changes the output to 16:10 by letterboxing
the image, which is recommended for use with
HDTV and DVDs enhanced for wide-screen
television.
NOTE
See Video Format Compatibility Tables on
page 34 for appearance descriptions in each
mode.