Mitel Networks Programmable Key Module 48 - Mitel SX-2000 EL Information Manual

Mitel Networks Programmable Key Module 48

The Mitel Networks Programmable Key Module 48 (PKM 48) provides SUPERSET 4025,
SUPERSET 4125, SUPERSET 4150 telephones, and attendant consoles with 48 additional
personal keys; 96 additional keys when two PKM 48 devices are daisy-chained. The
SUPERSET telephone requires a SUPERSET Interface Module (SIM1 or SIM2) in its base to
interface to the PKM 48. The attendant console requires a DSS/BLF Interface unit, page 90.
When an attendant console has a DSS/BLF interface unit associated with it, only busy lamp
field/direct trunk select keys can be programmed. When a PKM 48 is associated with a set, the
keys can be programmed with the following functions:
• Speed call keys
• Feature keys
• Key line appearances
• Personal outgoing line keys
• Key system appearances
• Multi-call line appearances
• CO line keys
• Busy lamp field/direct station select keys.
The flash rates for the Line Status Displays on the PKM 48 are identical to those on the
SUPERSET telephones. Keys are arranged in four vertical rows on the module. Beside each
key is a Line Status Display that indicates the status of the key.
Up to two PKM 48 devices connect with the attendant console or SUPERSET telephone. The PKM
48 has the same adjustable tilt mechanism as the SUPERSET telephone.You must plug the
mounting brackets to connect the PKM 48 to the SUPERSET telephone. The first PKM 48 connects
to the port located on the base of the set. The second PKM 48 connects to the first PKM 48.
50003510
Mitel Networks Programmable Key Module 48
Revision A
Peripherals
87