Table of Contents
Advertisement
Feature Description
keys listed above and marked with two asterisks (**), the adjacent LCD or LED indicators are
inoperative.
Flash - Calibrated
Users of industry-standard telephones access many system features using a hookswitch flash.
Calibrated Flash allows the system to consistently create the proper flash time thus preventing
confusion between flash and hang up attempts. On rotary dial sets, the user sends a calibrated
flash by dialing the digit "1". On DTMF sets equipped with a flash key, the user presses this
key to send a hookswitch flash to the system.
Flash Control
This set of options limits the use of Consultation Hold (hookswitch flash) under certain conditions
when an extension is in a call with a trunk or attempts to establish a call with a trunk.
Flash On Incoming Trunk allows extension users to put an incoming trunk on Consultation
Hold. This enables the trunk call to be transferred, held, or added to a conference. The option
does not apply when the extension is talking to a DISA trunk that has dialed into the system.
Flash On Outgoing Trunk is similar to the previous option but it applies to outgoing trunks.
Cannot Dial A Trunk After Flashing prohibits the extension user from accessing a trunk,
through dialing or picking up a trunk on hold at another extension, while a consultation hold is
in progress. The option does not apply to industry-standard telephones with Broker's Call or
Broker's Call With Transfer in their COS, or when picking up trunk calls that are ringing at
another extension.
Cannot Dial A Trunk If Holding Or In Conference With A Trunk prevents devices from dialing
a trunk call or picking up a trunk from another extension while another trunk is in a call
(conference or two party) on Consultation Hold. This option does not apply to industry-standard
telephones with Broker's Call or Broker's Call With Transfer in their COS.
Flash Disable
An extension can be inhibited from using all services requiring the use of the hookswitch flash.
For SUPERSET telephones, this prevents the extension from putting a call on Consultation
Hold.
Flash For Dial 0 (Attendant)
An extension can be set to ring the Dial 0 routing point (usually the Attendant) automatically if
a transfer is attempted while in an established call.
Flash For Waiting Call
This feature allows a user to place a call (2-party or multi-party) on consultation hold and connect
to a waiting call. This is accomplished via a hookswitch flash. See Campon Warning Tone of
this guide for information on allowing the telephone to receive an audible notification of waiting
calls.
50003510
Revision A
157
Hide quick links:
Advertisement
Table of Contents
