Site - Mitel SX-2000 EL Information Manual

SX-200 General Information Guide
Specification
Temperature
Humidity
Vibration
Mechanical
Stress

Site

Operating Temperature
Relative Humidity (Operating)
(non-condensing)
Heat Dissipation (approximate)
Maximum Altitude
Operating Temperature
Relative Humidity (Operating)
(non-condensing)
Heat Dissipation - fully loaded*
Air Flow
Acoustic Emission
* Conversion factors: 1 watt is equal to 3.412 BTUs per hour, 1 ton of refrigeration is equal to 12,000
BTUs per hour or 3.516 Kilowatts, and 3/4 Kilowatt-hour is equal to 1 ton of refrigeration
214
Storage Conditions (continued)
SX-200 IP Node
0º C to 40º C (32º F to 104º F)
15 to 95% Relative Humidity, non-condensing
0.5 g, 5 to 100 Hz, any orthogonal axis
1.5 g, 100 to 500 Hz, any orthogonal axis
One 15.3 cm (6 in.) drop, each edge and corner adjacent to the rest face –
unpackaged
One 76.2 cm (30 in.) drop, each edge and corner packaged in
cardboard & foam.
Site Conditions
SX-200 EL/ML System
0 to 40º C
20 to 80%
500 BTUs / hr
4000 m
SX-200 IP Node
15º to 35º C
40 to 90%
724 BTUs/hr
Revision A
Range
32 to 104º F
20 to 80%
13,000 ft.
59º to 95º F
150 cubic feet per minute at
maximum output of the fans
Maximum 50 dBA continuous, 75
dB intermittent (<10% duty cycle)
Page 2 of 2
50003510