Sx-200 El System Configuration; Sx-200 El Control Cabinet - Mitel SX-2000 EL Information Manual

SX-200 General Information Guide
LIGHTWARE 18 and greater software is enabled by the System ID module on the MCC. The
System ID module password is provided by Mitel Networks and defines which options have
been purchased. The password and options selection must match that provided on the MOSS
sheet which accompanies the system software.

SX-200 EL System Configuration

The SX-200 EL system can support a maximum of seven bays.
LIGHTWARE 19 supports the following peripheral bays:
• SX-200 RM Peripheral Bay
• SX-200 LIGHT Peripheral Bay
• SX-200 SPINE Peripheral Bay
• ISDN Bay (ISDN Network Gateway or PRI card)
• SX-200 IP Node
Note: The PRI card requires LIGHTWARE 17 Release 4.0 and greater.

SX-200 EL Control Cabinet

The SX-200 EL and SX-200 ML system use the SX-200 ELx cabinet (PN 9109-600-002-NA)
for the main control cabinet and the rack mount peripheral cabinets. The SX-200 ELx cabinet
has a steel frame, a plastic door, and an internal structure designed to hold the system cards
and components. The front door can be unlocked and removed to allow access to the cards.
36 Revision A 50003510