Isdn Network Gateway (North America Only); Sx-200 Myadministrator - Mitel SX-2000 EL Information Manual

ISDN Network Gateway (North America only)

The ISDN Network Gateway delivers the full benefits of ISDN network services for PRI voice
applications. ISDN delivers the highest degree of voice clarity of any transmission medium
available.
The ISDN Network Gateway lets you take full advantage of these enhanced voice capabilities
including calling number identification services (CLID/ANI) and called-line identification
(DDI/DNIS), which allow you to know who's calling and facilitate call center and CTI applications.
Plus, the ISDN Network Gateway supports fast call set-up, call-by-call, and Min/Max to speed
call handling and make more efficient use of trunking.

SX-200 MyAdministrator

The SX-200 MyAdministrator software application allows the user to perform basic changes to
the telephone configuration. With this application, the user connects to the system site locally
or remotely and can add, modify, or delete telephone sets; add, modify, or delete telephone
features, and control membership in telephone groups.
This application can manage the following device types:
• Mitel Networks 5010, 5020, 5215, and 5220 IP Phones
• Mitel Networks 5305 and 5310 IP Board Room Conference Units
• ONS Stations
• SUPERSET 401 and SUPERSET 4001 (key programming is not supported)
• SUPERSET 410, SUPERSET 4105, SUPERSET 420, SUPERSET 4025, SUPERSET
4125, and SUPERSET 4090
• SUPERSET 430, SUPERSET 4150, and their sub-attendant variants
• Programmable Key Modules
The application identifies the following devices: PKM Interface Unit (DSS/BLF Interface Unit),
COV, SUPERSET 3DN telephones, SUPERSET 4DN telephones, and DMP Units. You can
not program these devices.
The application works on a Pentium™ computer that has a minimum of 32 MB RAM, a CD-ROM
Drive, keyboard and mouse. The application is designed for use with the Microsoft
98, Windows 95, Windows 2000 Professional, Windows Millennium Edition, or a Windows NT
4.0 Workstation (Service Pack 4.0 or greater) operating system.
The PBX requirements consist of SX-200 LIGHTWARE 19 Release 1.0 or greater software
and the purchasable System Option 80, MyAdministrator Access. The PC is connected to the
PBX via the Maintenance Terminal at the back of the SX-200 cabinet. The PC is connected
directly with an RS-232 cable or indirectly with two modems, a null modem adapter, and two
RS-232 cables. The null modem adapter goes on the PBX side.
50003510 Revision A
Supporting Applications
®
Windows™
33