SX-200 General Information Guide
SX-200 IP Node
Output Voltage
+3.3 +/- 1.5%
+5.0V +/- 1%
+12.0V +/- 7%
Cabling
The SX-200 EL and SX-200 ML systems use standard male Amphenol 25-pair connectors for
cabling between the system and the main distribution frame (MDF). Cables to all
industry-standard telephones, SUPERSET telephones, and consoles are either 2- or 4-wire
with standard modular connectors.
Cable Lengths
The following rules must be followed for cable lengths between the system and the telephone.
Bridge taps are not permitted.
Twisted-pair cable (24 or 26 AWG)
Quad cable (22 AWG)
Modular line cord
T1 trunk card
226
30.0A
8.0A (Total power of 3.3V and 5.0V not to exceed 100W)
3.0A (Hard Disk Drive)
Cable
Cable Lengths Between the PBX and the Telephone
Output Power
Max Current
1000 m (3200 ft.)
50 m (160 ft.)
3 m (10 ft.)
200.5 m (655 ft.)
Revision A
Maximum Length
50003510