Data Capabilities - Mitel SX-2000 EL Information Manual

Product Overview

Data Capabilities

Datasets provide data facilities for terminals, digital SUPERSET telephones, and other types
of data circuits. The DATASET 1100 series support asynchronous data communications at
rates up to 19.2 kbps and interface with the system through a Digital Line Card or a DNIC
Module. The DATASET 2100 series support asynchronous and synchronous data
communications at rates up to 19.2 kbps and interface with the system through a Digital Line
Card or a DNIC Module.
MILINK Data Module: The MILINK Data Module is connected to a modular jack located on
the base of SUPERSET 410, SUPERSET 420, or SUPERSET 430 telephones, and is used to
interface a terminal, personal computer, or other peripheral device to a host computer. The
MILINK Data Module interfaces to the system through the same pair of wires that the telephone
set voice circuit uses. The MILINK Data module is discontinued but is still supported with the
SX-200 system.
DATASET 1101 Cartridge: A DATASET 1101 Cartridge is mounted within a SUPERSET 3DN
or a SUPERSET 4DN telephone set. The cartridge is connected via an internal cable to the
telephone set circuit and is used to interface a terminal, personal computer, or other peripheral
device to a host computer. It interfaces to the system Digital Line Card through the same pair
of wires that the telephone set voice circuit uses.
DATASET 1103 Standalone: The DATASET 1103 Standalone is packaged in a flat case which
can be placed under a standard desk telephone set. The DATASET 1103 Cartridge usually
interfaces a terminal, a personal computer, a printer, a file disk, or another peripheral device
to the system, for connection to a host computer or to another peripheral device.
DATASET 2103 Standalone: The DATASET 2103 Standalone is a
Synchronous/Asynchronous data set which is used with Mitel Networks PBXs to interface
peripheral devices to the system. It is packaged in a flat case which can be placed under a
standard desk telephone set. The DATASET 2103 Standalone connects to a DNIC circuit within
the PBX by a single twisted pair (the telephone set is connected independently).
Terminals and Printers: A VT100™ compatible terminal or personal computer with VT100
terminal emulation software can be connected to the system as a maintenance terminal. Printers
are used to create hard-copy records such as traffic reports, maintenance information, etc.
50003510 Revision A 19