EPSON EPL-C8000
FIP-1.31 WASTE TONER BOX is Out
Step
Check point
Perform the preliminary inspection.
Parts to inspect:
1
WASTE TONER BOX, DRAM CARTRIDGE, TONER BOX
SENSOR, TONER BOX HARNESS, MAIN HARNESS
ASSY, MCU PWB
l
2
Is the WASTE TONER BOX securely set?
Check: DRAM CARTRIDGE
3
l
Is the DRAM CARTRIDGE securely set?
Check: TONER BOX SENSOR installation
4
l
Is the TONER BOX SENSOR properly installed?
Check: TONER BOX SENSOR
l
Is the TONER BOX SENSOR properly functioning?
5
Diag Tool: Digital Input Test
Device code: 12
Chapter 5
TROUBLESHOOTING
Remedy
Yes
Replace/reinstall the defective part(s).
Go to Step 3.
Go to Step 4.
• With the diagnostic tool, go to step 5.
• Without the diagnostic tool, go to
FIP-2.18 "TONER BOX SENSOR is
Defective".
Replace the MCU PWB.
No
Go to Step 2.
Set the WASTE TONER BOX securely.
Set the DRAM CARTRIDGE securely.
Install the TONER BOX SENSOR
properly.
Go to FIP-2.18 "TONER BOX SENSOR
is Defective".
Rev. B
5-47