EPSON EPL-C8000
3.1.2 Tools
Table below shows the tools used for servicing.
Table 3-1. Tools
Must
Phillips screw driver (#1)
Phillips screw driver (#2)
Tweezers
Pliers
#F728 SELF TRAINING KIT (Code: 1050686)
#F691 DIAGNOSTIC TOOL
(Part Code: 1042425
ADJUSTMENT KIT (Code: 1046450)
Chapter 3
Disassembly and Assembly/Adjustment
3.1.3 Items to check after assembly
Performs the items described below when completing assembly after
repairing the printer or replace any parts.
o Clean the housings and the interior of the engine. (Refer to Chapter
Recommended
Soldering iron
o After assembling or adjust the printer, print an engine status sheet
E-ring holder
Mini screw driver
NOTE: After replacing any part which needs periodical replacement,
NOTE: When replacing MAIN FUSER ASSEMBLY, replace FILTER
o Check the program ROM version, and update it if necessary. (Refer
o Print several status sheets and check print quality.
o Send a few pages of data from the host computer and check for
6.)
to check the counters for the consumables and other parts which
need periodical replacing. If any of them is close to its life, replace it
with a new one.
clear the corresponding counter using the "Maintenance Menu".
(Refer to Chapter 6.) The parts replaced and the corresponding
operations to be performed are as listed below:
- 2ND BTR ASSEMBLY: 2ND BTR Clear
- MAIN FUSER ASSEMBLY: FUSER Counter Clear
ASSEMBLY as well.
to Section 3.2.3.)
proper functions of the printer.
Revision B
3-2