Inner Cover Assembly Removal (Pl1.1.10) - Epson ColorPage EPL-C8000 Service Manual

EPSON EPL-C8000

3.2.4.4 INNER COVER ASSEMBLY Removal (PL1.1.10)

NOTE: Be sure to perform Step 1 to support the FRONT COVER
ASSEMBLY.
1. Take out the UNIVERSAL TRAY about 20cm.
2. Open the FRONT COVER ASSEMBLY.
3. Remove the TOP COVER ASSEMBLY. (See Section 3.2.4.3.)
4. Remove the DRUM CARTRIDGE. (See Section 3.2.9.1.)
5. Remove the TENSION LEVER. (See Section 3.2.11.1.)
NOTE: As a result of the next step, the FRONT COVER ASSEMBLY
will be supported with 2 hinge parts only. Therefore, be
careful not to add excess force to the cover when handling it.
6. Remove 2 screws (black, cup head, 6mm) securing the right and left
COVER SUPPORT in the FRONT COVER ASSEMBLY to the
printer body.
7. Remove 7 screws (black, cup head, 6mm) securing the INNER
COVER to the printer body. Then tilt the INNER COVER
ASSEMBLY forward and lift it up to remove.
Chapter 3 Disassembly and Assembly/Adjustment
7)-2
6)
7)-1
7)-1
7)-1 7)-1
7)-1
7)-1
7)-1
Figure 3-8. INNER COVER ASSEMBLY REMOVAL
Revision B
6)
3-12