Fip-1.12 Paper Exit - Static Jam; Fip-1.13 Paper Regi. - Static Jam - Epson ColorPage EPL-C8000 Service Manual

EPSON EPL-C8000

FIP-1.12 Paper Exit - Static Jam

Step Check point
Perform the preliminary inspection.
1 Parts to inspect:
TOP EXIT SENSOR, MCU PWB
Check: TOP EXIT SENSOR for remainder
l
2
Is there any remaining paper, paper debris, or
foreign matter on the TOP EXIT SENSOR?
Check: TOP EXIT SENSOR
l
Is the TOP EXIT SENSOR properly functioning?
3 (Check it by using the diagnostic tool.)
Diag Tool: Digital Input Test
Device Code: 09

FIP-1.13 Paper REGI. - Static Jam

Step Check point
Perform the preliminary inspection.
Parts to inspect:
1
FUSER EXIT ACTUATOR, FUSER EXIT SENSOR,
FUSER IN ACTUATOR, FUSER IN SENSOR, FUSER
DRIVE ASSY, MCU PWB
.
Check: REGI SENSOR for remainder
l
2
Is there any paper, paper debris, or foreign matter
.
remaining on the REGI
.
Check: REGI SENSOR
l
.
Is the REGI SENSOR properly functioning?
3
(Check it by using the diagnostic tool.)
Diag Tool: Digital Input Test
Device Code: 1F
Chapter 5 TROUBLESHOOTING
Replace/reinstall the defective part(s).
Remove the remaining paper, paper
debris, or foreign matter.
Replace the MCU PWB.
Replace/reinstall the defective part(s).
Remove the remaining paper, paper
debris, or foreign matter.
SENSOR?
Replace the MCU PWB.
Remedy
Yes
Go to Step 2.
• With the diagnostic tool, go to step 3.
Go to FIP-2.32 "TOP EXIT SENSOR is
Defective".
Remedy
Yes
Go to Step 2.
• With the diagnostic tool, go to step 3.
• Without the diagnostic tool, go to FIP-
2.14 "REGI. SENSOR is Defective".
Go to FIP-2.14 "REGI. SENSOR is
Defective".
No
No
Rev. B
5-27