Epson ColorPage EPL-C8000 Service Manual page 347

EPSON EPL-C8000
Table 5-22. Controller Related Service-Call Error (1/2)
Error Error
Type Code
C 0017 CPU error (undefined interrupt)
C 0081 CPU error (TLB correction exception)
C 0082 CPU error (TLB miss exception [Load/Fetch])
C 0083 CPU error (TLB miss exception [Store])
CPU error (Address-error exception [Load/
C 0084
Fetch])
C 0085 CPU error (Address-error exception [Store])
C 0086 CPU error (Bus error exception [Fetch])
C 0087 CPU error (Bus error exception [Load/Store])
C 0088 CPU error (SYSCALL exception)
C 0089 CPU error (Break exception)
C 0090 CPU error (Reserved command exception)
CPU error (Coprocessor-not-in-use
C 0091
exception)
C 0092 CPU error (FPU exception)
C 0093 CPU error (TLB exception)
C 0094 CPU error (XTLB exception)
C 0095 CPU error (cache exception)
C 0096 CPU error (Trap exception)
C 0097 CPU error (FPU exception)
C 0098 CPU error (Watch exception)
0128~
C CPU error (Undefined trap)
0254
C 0255 CPU error (NMI exception)
C 0256 CPU error (Division by zero)
C 0257 CPU error (Operation overflow)
C 0258 CPU error (break)
C 0800 IPL error (Controller problem)
Error in standard RAM (Capacity below
C 1002
standard, or other)
C 1010 Verify error
C 1020 SD RAM DIMM error (Slot 0)
Chapter 5 TROUBLESHOOTING
Explanation Refer to:
FIP-1.47
FIP-1.47
FIP-1.47
FIP-1.47
FIP-1.47
FIP-1.47
FIP-1.47
FIP-1.47
FIP-1.47
FIP-1.47
FIP-1.47
FIP-1.47
FIP-1.47
FIP-1.47
FIP-1.47
FIP-1.47
FIP-1.47
FIP-1.47
FIP-1.47
FIP-1.47
FIP-1.47
FIP-1.47
FIP-1.47
FIP-1.47
FIP-1.42
FIP-1.41
FIP-1.41
FIP-1.41
Table 5-23. Controller Related Service-Call Error (2/2)
Error Error
Type Code
C 1021 SD RAM DIMM error (Slot 1)
C 1022 SD RAM DIMM error (Slot 2)
C 1100 ROM checksum error (IC9)
C 1101 ROM checksum error (IC8)
C 1120 ROM DIMM (P) checksum error (bits 0 to 7)
C 1121 ROM DIMM (P) checksum error (bits 8 to 15)
C 1122 ROM DIMM (P) checksum error (bits 16 to 23)
C 1123 ROM DIMM (P) checksum error (bits 24 to 31)
C 1180 Checksum error: optional ROM module A
C 1181 Checksum error: optional ROM module B
C 1185 Unsupported ROM module
C 1200 EEPROM (IC15) write error
EEPROM (IC15) write limit (number of writes
C 1210
reached limit)
C 1400 Engine initialization error
C 1500 CCNV (IC22) hardware error
C 1600 CPGI (IC23) hardware error
C 1999 Other hardware error
C 2000 Software error*
*: If soft errors occur, you may want to use the #F691 Diagnostic Tool to
perform "Slave Initialize" (from the service menu). After performing
the command, trun the printer off and back on. For details, see
Chatper 4.
Rev. B
Explanation Refer to:
FIP-1.41
FIP-1.41
FIP-1.42
FIP-1.42
FIP-1.43
FIP-1.43
FIP-1.43
FIP-1.43
FIP-1.44
FIP-1.44
FIP-1.44
FIP-1.45
FIP-1.45
FIP-1.47
FIP-1.46
FIP-1.46
FIP-1.47
FIP-1.47
5-13