Epson ColorPage EPL-C8000 Service Manual page 58

EPSON EPL-C8000
o Maintenance Menu
This display appears only if the maintenance menu is available for
selection (only if the operator uses undocumented sequence when
switching on power). Switching power off and then back on will
remove the maintenance menu from the display (so that it can no
longer be selected by the user). This menu is provided only for use
by maintenance engineers.
1. 2nd BTR Reset
Resets the 2nd BTR counter. The maintenance engineer must
reset this counter after replacing the 2nd BTR during
maintenance.
2. IBT Cleaner Reset
Resets the IBT Cleaner counter. The maintenance engineer
must reset this counter after replacing the lBT Cleaner.
3. Fuser Unit Reset
Resets the Fuser Unit counter. The maintenance engineer must
reset this counter after replacing the Fuser Unit.
4. Page Count Clear
CIears the total page count (aggregate total of printed pages:
engine's printer 1 and printer 2 counters).
5. Engine Status Sheet
Pressing the Enter switch starts printout of an engine status
sheet. lf language data is still in the printer, the sheet wiIl eject.
Engine Status Sheet will be printed with RIT, toner-save, and
resolution remained in the current settings; and all other set to
their factory defaults. The user-default environment remains in
effect after printing is completed. The LCD data blinks while
printing is in progress. The printed sheet will show the count
values of all of the engine's unit counters. The sheet is always
printed in English (regardless of the Setup menu's Lang setting).
Chapter 1 PRODUCT DESCRIPTIONS
Rev. B
1-42