Epson ColorPage EPL-C8000 Service Manual page 49

EPSON EPL-C8000
SelecType mode:
NOTE: SelecType mode is effective when no error has occurred.
1. To enter the SelecType mode, perform one of the followings:
1) Press the SelecType button to enter the SelecType mode
through the One touch mode 1 and 2.
2) Press the Menu button, Item, Value, or Enter button.
NOTE:SelecType mode is effective when no error has occurred.
2. Refer to the descriptions below to operate the SelecType mode.
1) In the setting menu select mode, select the desired menu by
pressing the Menu button. The menus are shown left-aligned on
the LCD.
2) To enter the setting item select mode, press the Item button. The
initial item appears in the format below:
"Setting Item = Current setting value *"
NOTE: The trailing * means the current setting value.
3) In the setting item select mode, press the Item button to bring up
the desired item. With each push of the Item button, the item is
switches to the next item, again shown in the format below:
"Setting Item = Current setting value *"
NOTE: The trailing * means the current setting value.
4) To select the value for the selected item, press the Value button.
Each value available appears in the format below:
"Setting Item = Current setting value *"
NOTE: The trailing * means the current setting value.
NOTE: Using the Alt button + Menu/Item/Value button, it is
possible to cycle through the lists backward.
Chapter 1 PRODUCT DESCRIPTIONS
NOTE: Keeping the Value button (+ Alt button) depressed for a
certain length of time causes the values to change
continuously.
5) In the value select mode, press the Enter button when the
desired value is displayed. The value is stored as the new setting
or excuted directly. (For the value previously set, pressing the
Enter button has no effect.)
6) In the itme select mode, pressing the Menu button brings back
the setting menu select mode and the next menu is displayed.
7) In the value select mode, pressing the Menu or Item button, the
item select mode is brought back.
3. To return to the On Line status from the SelecType mode, perform
one of the followings:
1) Press the On Line button.
2) Perform panel setting initialization.
3) Run a status sheet.
4) Press the SelecType button.
Rev. B
1-33