Low Paper Sensor Removal (Pl3.1.35); Tray No Paper Sensor Removal (Pl3.1.32) - Epson ColorPage EPL-C8000 Service Manual

EPSON EPL-C8000

3.2.6.8 LOW PAPER SENSOR Removal (PL3.1.35)

1. Remove the UNIVERSAL TRAY. (See Section 3.2.5.1.)
2. Remove the MSI TRAY ASSEMBLY. (See Section 3.2.7.1.)
3. Remove the MAIN P/H ASSEMBLY with the MSI TRAY ASSEMBLY
installed on it. (See Section 3.2.8.1.)
4. Remove TRAY N/P SENSOR ASSEMBLY. (See Section 3.2.6.7.)
5. Remove the screw (gold, tapped, 8mm) securing the LOW PAPER
SENSOR, and remove the LOW PAPER SENSOR.
Figure 3-25. LOW PAPER SENSOR Removal
When installing the LOW PAPER SENSOR, be sure to
align the peg on the TRAY N/P SENSOR with the
location hole in the LOW PAPER SENSOR.
Chapter 3 Disassembly and Assembly/Adjustment

3.2.6.9 TRAY NO PAPER SENSOR Removal (PL3.1.32)

1. Remove the UNIVERSAL TRAY. (See Section 3.2.5.1.)
2. Remove the MSI TRAY ASSEMBLY. (See Section 3.2.7.1.)
3. Remove the MAIN P/H ASSEMBLY with the MSI TRAY ASSEMBLY
installed on it. (See Section 3.2.8.1.)
4. Remove TRAY N/P SENSOR ASSEMBLY. (See Section 3.2.6.7.)
5. Disconnect the connector (P/J107) for the TRAY NO PAPER
SENSOR and remove the harness.
6. Release the hooks securing the TRAY NO PAPER SENSOR from
the TRAY N/P BRACKET and remove the TRAY NO PAPER
SENSOR.
Figure 3-26. TRAY NO PAPER SENSOR Removal
When installing the TRAY NO PAPER SENSOR, set the
TRAY N/P ACTUATOR staying above the TRAY NO
PAPER SENSOR.
Revision B
3-26