EPSON EPL-C8000
3.2.12.16 OIL CAM ASSEMBLY Removal (PL9.3.22)
1. Remove the EXIT TRAY ASSEMBLY. (See Section 3.2.13.1.)
2. Remove the OIL ROLL ASSEMBLY. (See Section 3.2.12.1.)
3. Remove the FUSER ASSEMBLY. (See Section 3.2.12.2.)
4. Remove the MAIN FUSER ASSEMBLY. (See Section 3.2.12.3.)
5. Remove the OIL CAM SOLENOID. (See Section 3.2.12.14.)
6. Remove the EXCHANGE SOLENOID. (See Section 3.2.12.15.)
NOTE: In the following step, be careful not to break the hook on the
OIL CAM ASSEMBLY.
7. Release 4 hooks on the FUSER TRAY LEVER and remove the
FUSER TRAY LEVER.
8. Remove the OIL CAM ASSEMBLY by pulling it out to the left
horizontally.
Chapter 3
Disassembly and Assembly/Adjustment
Figure 3-108. OIL CAM ASSEMBLY Removal
Revision B
3-91