Epson ColorPage EPL-C8000 Service Manual page 55

EPSON EPL-C8000
1.6.3 Details of Menus and Settings
This section contains the EPL-C8000-specific information on the menus
and settings.
o Test Print
Press the ENTER button to start test printing. If language data is still
in the printer, the sheet wilt eject. Test print will be printed with RIT
and toner-save, and resolution settings remain as they were before
the ENTER switch was pressed; and all other settings as their
factory default. The user-default environment remains in effect after
the test print is completed. The LCD data blinks while test printing is
in progress.
o Printing Menu
1. Wide A4
This setting is not effective under ESC/Page and ESC/Page-
Color modes.
2. Out Bin
Selects the ejection tray.
FD: Eject into face-down tray. Note that for certain paper
sizes and types the printer will force ejection into the
face-up tray regardless of this setting.
FU: Eject into face-up tray.
3. Manual
Manual Feed is always printed "1 up".
o Config Menu
1. RITech
The contour-correction feature operates during B/W printing or
special mode color printing.
Chapter 1 PRODUCT DESCRIPTIONS
2. Toner Save
During color printing, toner is saved by controlling halftone
propagation and reducing the print density.
3. Size Ignore
Setting the value to "On" generates "1up" printing.
4. PaperType
Fusing temperature and print speed are set to match the paper
type (Half-speed mode for the paper type except Normal).
-Normal: Copy paper, recycled paper, J paper, etc.
Print speed: Standard mode
-Thick: Envelopes, thick paper
Print speed: Half-speed mode
-Trnsprnc: OHP sheets
Print speed: Half-speed mode
Note that if paper size is set to "Envelope", paper type is
handled as "Thick" regardless of the setting that is made here.
o Setup Menu
1. Standby
Determines whether the printer goes into power-save standby
state when idle for a preset period of time.
-Enable: Enable power-save feature.
-Disable: Disable power-save feature.
If this feature is enabled, transition into power-save standby
mode is governed by the standby time setting and a countdown
timer.
Rev. B
1-39