Fuser Drive Assembly Removal (Pl11.1.2) - Epson ColorPage EPL-C8000 Service Manual

EPSON EPL-C8000

3.2.14.6 FUSER DRIVE ASSEMBLY Removal (PL11.1.2)

1. Remove the REAR COVER ASSEMBLY. (See Section 3.2.4.5.)
2. Remove the FUSER ASSEMBLY with the EXIT TRAY ASSEMBLY
and the OIL ROLL ASSEMBLY on it. (See Section 3.2.12.2.)
3. Remove the P/H MOTOR ASSEMBLY. (See Section 3.2.14.2.)
4. Remove the LVPS. (See Section 3.2.16.1.)
5. Release the harness from the clamp on the P/H MOTOR
BRACKET.
6. Remove the screw (black, cup head, 4mm) securing the P/H
MOTOR BRACKET, and remove the P/H MOTOR BRACKET.
7. Remove the KL clip securing the AUGER HIGH ASSEMBLY.
8. Remove 5 screws (black, cup head, 4mm) securing the FUSER
DRIVE ASSEMBLY, and remove the FUSER DRIVE ASSEMBLY.
When installing the FUSER DRIVE ASSEMBLY, be
careful not to catch the harness between the parts.
Chapter 3 Disassembly and Assembly/Adjustment
Figure 3-131. FUSER DRIVE ASSEMBLY Removal
Revision B
3-106