EPSON AcuLaser C2000 / AcuLaser C1000
4.2.3.2 Operation Panel Removal
1. Remove the Front Cover. (See "Front Cover Removal" on page -142.)
2. Remove the screws securing the Operation Panel. (3 from the front and 1
from the top)
3. Disconnect the harness from the connector on the Operation Panel and
remove the Operation Panel.
Figure 4-4. Operation Panel Removal
Disassembly and Assembly
4.2.3.3 Front Inner Cover Removal
1. Remove the Operation Panel. (See "Operation Panel Removal" on
page -143.)
2. Peel off the label on the rack rotation tab a little and remove 1 screw
securing the rack rotation tab to the printer frame.
3. Peel off the label on the transfer roller estrangement lever a little and
remove 2 screws securing the transfer roller estrangement lever to the
printer frame.
4. Remove 3 screws securing the Front Inner Cover to the printer frame.
5. Release the left hook on the Front Inner Cover and remove the Front Inner
Cover.
Disassembling Procedure
Figure 4-5. Front Inner Cover Removal
Revision E
143