Operation Panel Removal; Front Inner Cover Removal - Epson AcuLaser Color 2000 Service Manual

EPSON AcuLaser C2000

4.2.3.2 Operation Panel Removal

1. Remove the Front Cover. (See "Front Cover Removal" on page -123.)
2. Remove the screws securing the Operation Panel. (3 from the front
and 1 from the top)
3. Disconnect the harness from the connector on the Operation Panel
and remove the Operation Panel.
Figure 4-4. Operation Panel Removal
Disassembly and Assembly

4.2.3.3 Front Inner Cover Removal

1. Remove the Operation Panel. (See "Operation Panel Removal" on
page -124.)
2. Peel off the label on the rack rotation tab a little and remove 1 screw
securing the rack rotation tab to the printer frame.
3. Peel off the label on the transfer roller estrangement lever a little and
remove 2 screws securing the transfer roller estrangement lever to
the printer frame.
4. Remove 3 screws securing the Front Inner Cover to the printer frame.
5. Release the left hook on the Front Inner Cover and remove the Front
Inner Cover.
Disassembling Procedure
Figure 4-5. Front Inner Cover Removal
Revision C
124