4. Pull the cover release latch away from the computer, and push the cover
To replace the side cover, see "Replacing the cover" on page 77.
Attention: For proper cooling and airflow, replace the cover before turning on the
Support bracket removal
When working with some options, such as hard disk drives, adapters, and memory
modules, you must first remove the support bracket to access the existing option.
Do the following to remove the support bracket:
1. Pull out on the rear end of the support bracket approximately 150 mm (6 in.).
64
Hardware Maintenance Manual: IBM IntelliStation E Pro Type 6204 and Type 6214
toward the rear of the computer.
computer. Operating the computer with the cover removed might
damage computer components.