Removing And Installing The Support Bracket - IBM IntelliStation A Pro 6224 User Manual

For instructions for replacing the side cover, see "Replacing the side cover" on page
63.
Attention:
computer. Operating the computer with the cover removed might damage computer
components.

Removing and installing the support bracket

When working with some devices, such as hard disk drives, adapters, and memory
modules, you must first remove the support bracket to access the device.
Complete the following steps to remove the support bracket:
1. Read safety information beginning on page vii and the guidelines in "Handling
2. Remove the side cover ("Removing the side cover" on page 37).
3. Pull out on the rear end of the support bracket approximately 150 mm (6 in.).
4. Disengage the front end of the support bracket from the computer and set the
38
IntelliStation A Pro Type 6224: User's Guide
For proper cooling and airflow, replace the cover before turning on the
static-sensitive devices" on page 33.
bracket aside.
94
13