Adapter Considerations; Adapter Installation - IBM 621410U - IntelliStation E - Pro 6214 Hardware Maintenance Manual

The following illustration shows the location of expansion slots on the system
board.
AGP
(J5E1)
PCI 1
PCI 2
PCI 3
PCI 4
PCI 5
Adapter considerations: Before you install adapters, review the following:
v Follow the instructions that come with the adapter in addition to the instructions
v You can install full-length adapters in all five PCI slots.
v The computer supports 5.0 V and universal PCI adapters; it does not support
v The computer uses a rotational interrupt technique to configure PCI adapters.
v PCI slots 1 through 5 are on PCI bus 0.
v For a list of supported options for the computer, refer to
Adapter installation: Do the following to install an adapter in the tower model:
66
Hardware Maintenance Manual: IBM IntelliStation E Pro Type 6204 and Type 6214
Microprocessor
(J4K1)
in this chapter. If you need to change the switch or jumper settings on the
adapter, follow the instructions that come with the adapter.
3.3 V adapters.
Because of this technique, you can install a variety of PCI adapters that currently
do not support sharing of PCI interrupts.
The system scans the AGP slot and PCI expansion slots 1 through 5 to assign
system resources. Then, the system starts the PCI devices in the following order,
if you have not changed the default startup sequence: PCI expansion slots 1 and
2, system board integrated drive electronics (IDE) or SCSI devices, and then PCI
expansion slots 3 through 5.
http://www.ibm.com/pc/support/ on the World Wide Web.
DIMM 1 DIMM 2 DIMM 3
Battery