IBM 621410U - IntelliStation E - Pro 6214 Hardware Maintenance Manual page 119

Error Code/Symptom
201-XXX-0NN
(Failed Memory test, see
"IBM Setup Utility main
menu choices" on page 32.)
NN = DIMM location.
201-XXX-999
(Multiple DIMM failure, see
error text.)
202-XXX-001
(Failed System Cache test)
206-XXX-000
(Failed Diskette Drive test)
215-XXX-000
(Failed IDE CD-ROM test)
217-198-XXX (Could not
establish drive parameters)
217-XXX-000
(Failed BIOS Fixed Disk test)
Note: If RAID is configured,
the fixed disk number refers
to the RAID logical array.
217-XXX-001
(Failed BIOS Fixed Disk test)
Note: If RAID is configured,
the fixed disk number refers
to the RAID logical array.
217-XXX-002
(Failed BIOS Fixed Disk test)
Note: If RAID is configured,
the fixed disk number refers
to the RAID logical array.
264-XXX-0NN
(NN = SCSI ID of failing
Tape Drive)
264-XXX-999
(Errors on multiple tape
drives, see error text for more
info)
FRU/Action
1. DIMM Location J1-J4
2. Memory card
1. See error text for failing DIMMs
1. Microprocessor CPU 1
1. Cable
2. Diskette Drive
3. System Board
1. CD-ROM Drive Cables
2. CD-ROM Drive
3. System Board
1. Check cable and termination
2. SCSI backplane
3. Fixed disk
1. Fixed Disk 1
1. Fixed Disk 2
1. Fixed Disk 3
1. Tape Cartridge, if user executed the Read/Write Tape Drive test (XXX = 256)
2. SCSI or power cable connected to the tape drive with SCSI ID NN
3. Tape drive with SCSI ID NN – refer to Help and Service Information appendix of
tape drive's User Guide.
4. I/O Legacy Board or SCSI Controller – run SCSI Controller diagnostic to
determine of SCSI bus is functioning properly.
1. See error messages/text in the PC Doctor error log for detailed information on
each individual tape drive error.
111
Symptom-to-FRU index