Table of Contents
Advertisement
firmly into the expansion slot.
Attention: Be certain that the adapter is correctly seated in the expansion slot
before you turn on the computer. Incomplete installation of an adapter might
damage the system board or the adapter.
12. Connect required cables to the adapter.
13. If you have another adapter, repeat steps 1 through 12 If you have another
option to install, do so now. Otherwise, complete the rest of the steps in this
section.
14. Reinstall the rear adapter support bracket; then rotate the bracket to the closed
(locked) position.
15. Replace the frame support bracket.
16. Return the drive bay cages to their original positions in the computer.
17. Replace the top cover, see "Replacing the cover" on page 56 for details.
18. Reconnect the external cables and power cords; then turn on the attached
devices and the computer.
SCSI adapter installation: Some models come without SCSI adapters. Do the
following to install an optional SCSI adapter:
1. If you do not have a preinstalled SCSI adapter, complete steps 1 on page 48
through 12 of "Adapter installation" on page 48.
2. Connect the SCSI signal cable to the adapter and one or more of the signal
cable connectors to the rear of the SCSI devices.
3. Connect the SCSI activity indicator cable to the adapter and to the SCSI LED
connector (J35) on the system board. See "System board" on page 43 for the
49
Installing options
Advertisement
Chapters
Table of Contents
Troubleshooting
