IBM 621410U - IntelliStation E - Pro 6214 Hardware Maintenance Manual page 84

1. Review the safety precautions listed in "Safety information" on page 131.
2. Turn off the computer and all attached devices. Disconnect all external cables
3. Use a screwdriver to remove the two metal knockouts.
4. Insert the U-bolt through the rear panel; then attach and tighten the nuts.
5. Thread the cable through the U-bolt and around an object that is not part of or
6. Reconnect the external cables and power cords, turn on the attached devices,
76
Hardware Maintenance Manual: IBM IntelliStation E Pro Type 6204 and Type 6214
and power cords; then remove the cover. See "Removing the cover" on page 45
or "Side cover removal" on page 63 for details.
permanently secured to the building structure or foundation, and from which
the cable cannot be removed. Fasten the cable ends together with a lock. After
you add the security cable, be certain it does not interfere with other cables
connected to the computer.
and then turn on the computer.