IBM 621410U - IntelliStation E - Pro 6214 Hardware Maintenance Manual page 116

Beep/Symptom
3-2-4
(Failure comparing
CMOS memory size
against actual)
3-3-1
(Memory size mismatch
occurred, see "IBM
Setup Utility main
menu choices" on
page 32)
3-3-2
(Critical SMBUS error
occurred) (I2C bus
error)
3-3-3
(No operational
memory in system)
Two Short Beeps
(Information only, the
configuration has
changed)
Three Short Beeps
One Continuous Beep
Repeating Short Beeps 1. Keyboard
One Long and One
Short Beep
One Long and Two
Short Beeps
Two Long and Two
Short Beeps
No beep symptoms
No Beep Symptom
No beep and the system
operates correctly.
108
Hardware Maintenance Manual: IBM IntelliStation E Pro Type 6204 and Type 6214
FRU/Action
1. DIMM
2. Battery
3. System board
1. DIMM
2. System board
3. Battery
1. Disconnect the workstation power cord from outlet, wait 30 seconds and retry.
2. System Board
3. DIMMs
4. Power Supply
5. I2C Cable
1. Install or reseat the memory modules, then do a 3 boot reset. (See "Using the IBM
Setup Utility program" on page 31.)
2. DIMMs
3. System Board
1. Run Diagnostics
2. Run Configuration/Setup
1. DIMM
2. System Board
1. Processor
2. System Board
2. System Board
1. Video adapter (if present)
2. System Board
1. Video adapter (if present)
2. System Board
1. Video adapter
FRU/Action
1. Check speaker cables
2. Speaker
3. System board