Video Connector - IBM 621410U - IntelliStation E - Pro 6214 Hardware Maintenance Manual

v Line out
v Microphone
v One video (optional multiple connectors on some models)
v One Ultra160 SCSI (some models)

Video connector

The computer uses an AGP adapter located in the AGP slot on the system board.
The video connector is on the adapter and is located on the rear of the computer.
See "Input/output connectors" on page 78 for the location of this connector.
5 1
15 11
Table 8. Monitor connector-pin assignments
Pin Signal
1 Red
2 Green
3 Blue
4 Monitor ID 2 – not used
5 Ground
6 Red ground
7 Green ground
8 Blue ground
Some models come with a digital video interface (DVI) connector for connecting a
digital monitor.
1 C1 C2
C3 C4
C5
Table 9. DVI monitor connector-pin assignments
Pin Signal description
1 TMDS Data2-
2 TMDS Data2+
3 Data2/4 shield
4 TMDS Data4-
5 TMDS Data4+
6 DDC clock
7 DDC Data
8 Analog VSync
9 PMDS Data1-
10 TMDS Data1+
11 Data1/3 shield
12 TMDS Data3-
I/O Pin Signal
O 9 +5 V dc, used by DDC2B
I 10 Ground
O 11 Monitor ID 0 – not used
I 12 DDC2B data
13 Horizontal sync
14 Vertical sync
15 DDC2B clock
Pin Signal description
16 Hot plug detect
17 TMDS Data0-
18 TMDS Data0+
19 Data0/5 shield
20 TMDS Data5-
21 TMDS Data5+
22 Clock shield
23 TMDS clock+
24 TMDS Clock-
C1 Analog red
C2 Analog green
C3 Analog blue
I/O
I/O
O
O
I/O
79
Installing options