Error Code/Symptom
1801 (Not enough space
available to shadow ROM)
1802 (Not enough I/O space
available)
1803 (Not enough memory
space available)
1804 (Not enough real
memory space available)
1805 (Adapter ROM
checksum error)
1962 (Drive does not contain
a valid boot sector)
2400 (Video controller test
failure)
2462 (Video memory
configuration error)
5962 (IDE CD-ROM
configuration error)
8603 (Pointing Device Error)
00012000 (Processor machine
check)
00019501 (Microprocessor is
not functioning - check VRM
and processor LEDs)
00019701 (Microprocessor
failed BIST)
FRU/Action
1. Run Configuration/Setup
2. Failing Adapter
3. System Board
1. Run Configuration/Setup
2. Failing Adapter
3. System Board
1. Run Configuration/Setup
2. Failing Adapter
3. System Board
1. Run Configuration/Setup
2. Failing Adapter
3. System Board
1. Run Configuration/Setup
2. Failing Adapter
3. System Board
1. Verify a bootable operating system is installed.
2. If RAID system, refer to the Hardware Maintenance Manual for the specific
RAID adapter.
3. Run Diagnostics
4. Hard Disk Drive
5. Cable
6. SCSI Backplane
7. System Board
1. Video Adapter (if installed)
2. System Board
1. Video Adapter (if installed)
2. System Board
1. Run Configuration/Setup
2. CD-ROM Drive
3. CD-ROM Power Cable
4. IDE Cable
5. System Board
6. Battery
1. Pointing Device
2. System Board
1. Update BIOS
2. Replace microprocessor
1. Microprocessor
2. System Board
1. Microprocessor
2. System Board
117
Symptom-to-FRU index