Processor / Fan Sink - IBM 621410U - IntelliStation E - Pro 6214 Hardware Maintenance Manual

3. Disconnect the internal power supply cables.
4. Remove the 4 screws that secure the power supply to the chassis.
5. Lift the power supply out of the chassis.
6. To replace the power supply, reverse the previous steps.

Processor / fan sink

To remove the processor and fan sink, do the following:
1. Power-off the computer and remove external cables.
2. Remove the cover and support bracket (see "Side cover removal" on page 63
3. Remove any components that impede access to the processor.
4. Disconnect any cables that impede access to the processor.
5. Remove fan sink from processor:
100
Hardware Maintenance Manual: IBM IntelliStation E Pro Type 6204 and Type 6214
Note: Read "Before you begin" on page 41 and the safety notices at "Safety notices
(multi-lingual translations)" on page 135.
and "Support bracket removal" on page 64).
Note: The fansink and underlying heatsink are attached and do not need to be
separated from each other. Remove the fansink/heatsink assembly from
the processor as a single unit.