IBM 621410U - IntelliStation E - Pro 6214 Hardware Maintenance Manual page 47

– 8 seconds
v Legacy OS wake up support
Select this choice to enable or disable a non-Windows operating system to use
the adapter remote wake up capability. The default setting is Disabled.
Notes:
1. Use the default setting for Advanced Configuration and Power Interface
(ACPI) aware operating systems, such as Windows 2000 and Windows XP.
2. If your computer is running a non-ACPI operating system, you must set this
selection to enable it to use the Wake-on-LAN support.
3. When using a non-ACPI operating system, do not send a wake up packet to
the computer while it is turned on. If a wake up packet has been sent while
the computer is on, you might be unable to turn the computer off.
39
Configuration