Table of Contents
Advertisement
2. When the message
3. Follow the instructions that appear on the screen.
Use the left and right arrow keys to select menu choices on the menu bar at the
top of the screen. To change a setting on an item, select the item, and press Enter
to activate a setting selection dialogue box. Use the up and down arrow keys to
select the desired setting, and press Enter again.
IBM Setup Utility main menu choices
The IBM Setup Utility main menu appears at the top of the IBM Setup Utility
program screen. Using the items of this menu, you can select settings that you
want to change. Item specific Help information for each menu item appears on the
right hand side of the IBM Setup Utility program screen. Select the item to view
this information. The choices on some menus might differ slightly, depending on
the BIOS version on the computer.
The following sections provide descriptions of the choices available from the main
menu.
Main
This choice is automatically selected when the IBM Setup Utility program starts.
Here, you can view general information about your computer, such as a summary
of components and computer configuration.
Information appearing under the Main menu includes the type and speed of the
microprocessor, the amount of memory that is installed, the machine type and
model number, the computer serial number, and the revision level or issue date of
the BIOS code that is stored in the flash electronically erasable programmable ROM
(EEPROM). You can also view the language that your computer is set to display.
32
Hardware Maintenance Manual: IBM IntelliStation E Pro Type 6204 and Type 6214
system, turn off the computer, wait a few seconds until all in-use lights go off,
and restart the computer. (Do not use Ctrl+Alt+Del to restart the computer.)
screen during startup, press F1. (This prompt appears on the screen for only a
few seconds. You must press F1 quickly.)
Note: If you have set both user and administrator passwords, you must type
the administrator password to access the full IBM Setup Utility menu.
Main
Devices
Startup
System Summary
Product Data:
MachineType/Model
Flash EEPROM Revision Level
Boot Block Revision Level
System Board Identifier
System Serial Number
BIOS Date (MM/DD/YY)
System UUID
System Time (HH:MM:SS)
System Date (MM/DD/YY)
Language:
F1
Help
Select Item
Esc
Exit
Select Menu
appears in the lower-left corner of the
IBM Setup Utility
Advanced
Security
Item Specific Help
Select this option to
ASOK999
view a summary of the
20KT05AUS
system hardware
2005A
configuration
SYSTEMBOARD
1234567
06/27/01
[09:44:40]
[07/02/2001]
[English (US)]
-/+
Change Values
F9
Enter
Select
Sub-Menu
F10
Power
Exit
Setup Defaults
Save and Exit
Advertisement
Chapters
Table of Contents
Troubleshooting
