Preinstallation Steps - IBM 621410U - IntelliStation E - Pro 6214 Hardware Maintenance Manual

bay 3, and a hard disk drive installed in bay 4.
Notes:
1. Diskette drives, tape drives, CD-ROM, and DVD-ROM drives are examples of
2. You can install a 3.5-in. slim-high or a 5.25-in. half-high removable-media drive,
3. You can only install a 3.5-in. slim-high removable-media drive in bay 4.
4. The IntelliStation E Pro computer supports only one diskette drive.
5. To install a 3.5-in. drive in a 5.25-in. bay, you must use a 5.25 in. conversion kit,
6. The electromagnetic interference (EMI) integrity and cooling of the computer
7. For a complete list of supported options for the computer, refer to
Preinstallation steps: Before you install drives in the computer, verify that you
have all the cables and other equipment specified in the documentation that comes
with the drive. You might also need to perform certain preinstallation activities.
Some of the steps are required only during the initial installation of an option.
1. Read "Safety information" on page 131, "Handling electrostatic
2. Choose the bay in which you want to install the drive.
70
Hardware Maintenance Manual: IBM IntelliStation E Pro Type 6204 and Type 6214
removable-media drives. You can install removable-media drives in bays 1, 2, 3,
and 4 only.
such as a tape backup drive, in bay 2.
supplied with the option.
are protected by having all bays and PCI slots covered or occupied. When you
install a drive or PCI adapter, save the EMC shield and filler panel from the
bay or the PCI adapter slot cover in the event you later remove the option.
http://www.ibm.com/pc/support/ on the World Wide Web.
discharge-sensitive devices" on page 134, and the documentation that comes
with the drive.