Regulatory Information; Fcc Part 15; Ices-003; Us Regulatory Information For The Fax Kit Option - Xerox CopyCentre C35 Quick Reference Manual

Regulatory Information

FCC Part 15

This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interferences at
their own expense.
Changes or modifications to this equipment not specifically approved by the Xerox
Corporation may void the user's authority to operate this equipment.
WARNING:Shielded cables must be used with this equipment to maintain
compliance with FCC regulations.

ICES-003

This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du
Canada.

US Regulatory Information for the Fax Kit option

Fax Send Header Requirements: The Telephone Consumer Protection Act of
1991 makes it unlawful for any person to use a computer or other electronic device,
including FAX machines, to send any message unless such message clearly
contains in a margin at the top or bottom of each transmitted page or on the first
page of the transmission, the date and time it is sent and an identification of the
business or other entity, or other individual sending the message and the telephone
number of the sending machine or such business, other entity, or individual. (The
telephone number provided may not be a 900 number or any other number for
which charges exceed local or long-distance transmission charges.) The country
location, telephone number identifying the machine, the header text information
(business name), the send and receive behavior and dial type must be entered
when installing the Embedded Fax kit option. Refer to the System Administration
CD (CD1) for further information on installing Embedded Fax and the Training and
Information CD (CD2) for information about the Transmit Header Print feature.
Page 1-12 Quick Reference Guide