Table of Contents
Advertisement
Changing the Severity Level for Individual Events
To change the event severity level for a specific event, perform the following steps:
Note:
1. On the Configure Alerts window, click the Alerts Setting tab.
The Alerts Setting portion of the window appears.
2. Click Change Individual Events. The Change Individual Events dialog appears. The dialog
shows the events by their ID number, description, and severity level.
3. Click an event in the list to select it. The current severity appears in the Severity cell for the
selected event.
4. Click the Severity cell for the event. The Event Severity drop-down menu appears for that
event, as shown in the following figure.
Figure 58
5. Select a different severity level for the event from the menu.
6. Click OK to return to the Configure Alerts window.
You may click Cancel to discard your current changes and to go back to the Configure Alerts
window.
7. In the Configure Alerts window, click OK to save all the changes made to the events.
Rollback to Default Individual Event Configuration
To revert back to the default alert delivery method and the default severity level of an individual
event, perform the following steps:
1. On the Configure Alerts window, click the Alerts Setting tab.
The Alerts Setting portion of the window appears.
2. Click Change Individual Events.
The Change Individual Events dialog appears, as shown in
events by their ID number, description, and the severity level.
3. Click Restore Defaults.
The Change Individual Events dialog appears with the default alert delivery method and the
default severity level of all individual events.
Monitoring Controllers and Its Attached Devices
DB09-000202-05 37857-02
Rev. F - May 2011
See
Table 1
for details about the severity levels.
Change Individual Events Severity Level Menu
Copyright © 2011 by LSI Corporation. All rights reserved.
Figure
57. The dialog shows the
Page 75
Advertisement
Table of Contents
