Table of Contents
Advertisement
Configuration options are also available for you to access the Configuration wizard that you use
to perform configuration drive groups and virtual drives. To access the Wizard, select the controller
in the left panel, and select Go To->Controller->Create Virtual Drive, as shown in the following
figure.
Figure 20
Log Menu – The Log menu includes options for saving and clearing the message log. For more
information, see
Tools Menu – On the Tools menu you can select Tools->Configure Alerts to access the
Configure Alerts screen, which you can use to set the alert delivery rules, event severity levels,
exceptions, and email settings. For more information, see
Help Menu – On the Help menu you can select Help->Contents to view the MegaRAID Storage
Manager online help file. You can select Help->About MegaRAID Storage Manager to view the
version information for the MegaRAID Storage Manager software.
Note:
Page 36
Startup and Main Windows
DB09-000202-05 37857-02
Rev. F - May 2011
Create Virtual Drive Menu Options
Alert Delivery Methods
When you use the MegaRAID Storage Manager software online help, you might see
a warning message that Internet Explorer has restricted the file from showing active
content. If this warning appears, click on the active content warning bar, and enable
the active content.
If you are using a Linux operating system, you must install Firefox
the MegaRAID Storage Manager software online help to display.
When connected to the VMWare server, only the IP address and the host name
information appear. Additional information, such as the operating system name,
version, and architecture do not appear.
Copyright © 2011 by LSI Corporation. All rights reserved.
and
Events and
Messages.
Configuring Alert
Notifications.
®
®
or Mozilla
for
Advertisement
Table of Contents
