Figure 122 Virtual Drive Erase Menu
The menu has the following options.
•
Simple – (Alt + S) – After you select this option and click OK and if Delete Virtual Drive
after Erase is selected, the following figure is displayed; otherwise, Figure 124 is displayed.
•
Normal – (Alt + N) – After you select this option and click OK, and if Delete Virtual Drive
after Erase is selected, the following figure is displayed; otherwise, Figure 124 is displayed.
•
Thorough – (Alt + T) –After you select this option and click OK and if Delete Virtual Drive
after Erase is selected, the following figure is displayed; otherwise, Figure 124 is displayed.
•
Delete Virtual Drive after Erase – (Alt + D) – When you select this option, the virtual drive
is erased and the following figure is displayed; otherwise, Figure 124 is displayed.
•
OK – (Alt + O) – Click OK and if Delete Virtual Drive after Erase is checked, the following
figure is displayed; otherwise, Figure 124 is displayed.
•
Cancel – (Alt + C) – When you select this option, the dialog closes, and the MegaRAID
Storage Manager navigates back to Physical view.
Figure 123 Warning Message for Virtual Drive Erase
•
Click Yes to erase the virtual drive.
•
Click No to cancel the erase and close the dialog.
Page 132
Using the MegaRAID Advanced Software
DB09-000202-05 37857-02
Rev. F - May 2011
Copyright © 2011 by LSI Corporation. All rights reserved.