Table of Contents
Advertisement
Figure 4
The Select Server window shows an icon for each server on which the MegaRAID Storage
Manager software is installed. The servers are color-coded with the following definitions:
•
Green: The server is operating properly.
•
Yellow: The server is running in a partially degraded state (possibly because a drive in a virtual
drive has failed).
•
Orange: The server is running in a degraded state.
•
Red: The server storage configuration has failed.
To log in to a server, follow these steps:
1. Double-click the icon of the server that you want to access.
The Server Login window appears.
2. Select an access mode from the drop-down menu.
–
–
3. Enter your user name and password, and click Login.
If the computer is networked, this is the login to the computer itself, not the network login.
Page 22
Startup and Main Windows
DB09-000202-05 37857-02
Rev. F - May 2011
Select Server Window
Select Full Access if you need to both view the current server configuration and change
the configuration.
Select View Only if you only need to view the server configuration.
Copyright © 2011 by LSI Corporation. All rights reserved.
Advertisement
Table of Contents
