Monitoring Controllers and Its Attached
Devices
The MegaRAID Storage Manager software enables you to monitor the activity of all the controllers
present in the system and the devices attached to them.
When you perform an operation on devices (such as the creation of a new virtual drive) or when
devices automatically go from an optimal state to a different state (such as a created virtual drive
goes to a degraded state or a Battery Backup Unit goes bad), the MegaRAID Storage Manager
software gets those events from the controller and gives a notification to you, using different alert
delivery methods.
This section contains the following topics:
•
Alert Delivery Methods
•
Configuring Alert Notifications
•
Monitoring Server Events
•
Monitoring Controllers
•
Monitoring Drives
•
Monitoring Virtual Drives
•
Monitoring Enclosures
•
Monitoring Rebuilds and Other Processes
Alert Delivery Methods
Based on the severity level (Information, Warning, Critical and Fatal), the default alert delivery
methods change. By default, each severity level has one or more alert delivery methods
configured for it, as shown in
Alert
Notifications. The different alert delivery methods are as follows:
•
Vivaldi Log/MegaRAID Storage Manager Log
•
System Log
•
Pop-up Notification
•
E-mail Notification
Monitoring Controllers and Its Attached Devices
DB09-000202-05 37857-02
Rev. F - May 2011
Table
1. To modify these alert delivery methods, see
Copyright © 2011 by LSI Corporation. All rights reserved.
Configuring
Page 67