Table of Contents
Advertisement
Figure 28
4. Select the following items on the Create Drive Group Settings window:
a. Select the RAID level desired for the drive group from the drop-down menu. To make a
b. Scroll down the menu for the Drive security method field if you want to set a drive
c. Select unconfigured drives from the list of drives, and click Add > to add them to the drive
Page 44
Configuration
DB09-000202-05 37857-02
Rev. F - May 2011
Create Drive Group Settings
spanned drive, select RAID 10, RAID 50, or RAID 60 in the RAID level field.
Drive Group 0 and Span 0 appear in the Drive groups field when you select RAID 10,
RAID 50, or RAID 60.
The RAID controller supports RAID levels 1, 5, 6, 10, 50, and 60. In addition, it supports
independent drives (configured as RAID 0 and RAID 00). The screen text gives a brief
description of the RAID level you select. The RAID levels you can choose depends on
the number of drives available.
security method.
The drive security feature provides the ability to encrypt data and use disk-based key
management for your data security solution. This solution provides protection to the data
in the event of the theft or loss of drives.
group.
The selected drives appear under Span 0 below Drive Group 0, as shown in the following
figure.
Copyright © 2011 by LSI Corporation. All rights reserved.
Advertisement
Table of Contents
