Table of Contents
Advertisement
–
–
–
2. Click OK.
The settings are edited.
Create View Using Manage Snapshots Wizard
You can create views using the Create View button present in the Manage Snapshots area under
the View Details field. The view provides the snapshot details of the virtual drive available at that
particular time.
Follow these steps to create views of the snapshots.
1. Click Create View button in the Manage Snapshots wizard.
The Create View dialog appears as shown in the following figure.
Figure 104 Create View
2. In the View name field, enter the name of the view.
3. In the Write capacity field, use the drop-down selector to allocate capacity for writes to the
view.
4. Click OK.
The capacity is allocated for writes to the view.
Viewing Snapshot Details
If the view details of the snapshot are available at that particular time for the virtual drive, the view
details appear under the view details in the Manage snapshots wizard as shown in the following
figure.
Using the MegaRAID Advanced Software
DB09-000202-05 37857-02
Rev. F - May 2011
Automatically delete the oldest snapshot option, if you want to delete the oldest
snapshot
Stop taking snapshots option, if you want to stop taking snapshots
Take a snapshot on every reboot (recommended for boot virtual drive) option, if you
want a snapshot on every reboot.
Copyright © 2011 by LSI Corporation. All rights reserved.
Page 119
Advertisement
Table of Contents
