Table of Contents
Advertisement
Figure 140 Unlock Foreign Drives
•
The locked drives field display the drives that are locked with LKM mode.
•
The Security Key displays the LKM security key for the VD.
After you enter the security key in the Security key field, the system tries to unlock each of the
locked foreign drives using the security key. If at least one drive is unlocked, then the Import
preview screen is displayed. If no drives are unlocked, the Incorrect security Key dialog is
displayed.
Importing Foreign Drives to EKM
When a virtual drive is secured with EKM mode, and that virtual drive is in foreign state, and if
you switch to EKM mode, and if you want to import to foreign configuration, then the dialog
appears as shown in the following figure.
Figure 141 Switch to EKM Mode
Page 144
Using the MegaRAID Advanced Software
DB09-000202-05 37857-02
Rev. F - May 2011
Copyright © 2011 by LSI Corporation. All rights reserved.
Advertisement
Table of Contents
