Table of Contents
Advertisement
Maintenance
You can use the MegaRAID Storage Manager software to easily perform system maintenance
tasks, such as running patrol read operations, upgrading firmware, and running consistency
checks on drive groups that support redundancy. For more information, see the
Managing Storage Configurations
Hardware Requirements
The hardware requirements for the MegaRAID Storage Manager software are as follows:
•
PC-compatible computer with an IA-32 (32-bit) Intel Architecture processor or an EM64T
(64-bit) processor; also compatible with SPARC V9 architecture-based systems
•
Minimum 256 MB of system memory (512 MB recommended)
•
Drive with at least 400 MB of free space available; Solaris 10 SPARC requires a minimum of
640 MB
The supported operating systems for the MegaRAID Storage Manager software are as follows:
•
Microsoft
2008R2, Microsoft Windows XP, Microsoft Windows Vista, and Microsoft Windows 7
•
Red Hat Linux 3.0, 4.0, 5.0, and 6.0
•
Solaris 10 x86, SPARC
•
SuSE Linux/SLES 9, 10, and 11, with the latest updates and service packs
•
VMware ESX 3.5 and above
Refer to your server documentation and to the operating system (OS) documentation for more
information on hardware and operating system requirements.
Page 2
Introduction
DB09-000202-05 37857-02
Rev. F - May 2011
topic.
®
®
Windows
Server 2003, Microsoft Windows Server 2008, Microsoft Server
Copyright © 2011 by LSI Corporation. All rights reserved.
Maintaining and
Advertisement
Table of Contents
