Changing Adjustable Task Rates
If you want to change the Rebuild rate and other task rates for a controller, you must first log onto
the server in Full Access mode. (LSI recommends not changing the adjustable task rates from
their defaults.) Follow these steps to set the adjustable task rates:
1. Select a controller icon in the Physical tab or the Logical tab in the left panel of the
MegaRAID Storage Manager main menu window.
2. Select Go To->Controller->Set Adjustable Task Rates from the menu bar, as shown in the
following figure.
Figure 36
The Set Adjustable Task Rates dialog appears, as shown in the following figure.
Figure 37
Page 52
Configuration
DB09-000202-05 37857-02
Rev. F - May 2011
Set Adjustable Task Rates Menu
Set Adjustable Task Rates Dialog Box
Copyright © 2011 by LSI Corporation. All rights reserved.